Відео

Good night

I made my own physics mod which reduces the damping of the suspension and I also increased the mass of the cabin. The in-game settings are basicaly suspension as soft as possible and truck stability about 30%. This is the physics.sii SiiNunit { physics_data: .phdata { # Several changes have been made in v1.33: # - Suspension springing linearity curves recalibrated and made slightly progressive to simulate air springs # - Chassis suspension damping linearity curve recalibrated to simulate different compression and rebound behaviour # - Chassis suspension travel and working point recalibrated to mimic actual real-life parameters # - Maximum steering lock increased slightly to calibrate trucks' turning circles # - Braking curve made more linear to better simulate actual braking behaviour at lower speeds # - Cabin suspension and damping reworked # - Cabin mass increased to 650kg for better simulation accuracy # - Wheel mass reduced for better accuracy # - Chassis suspension damping adjusted for better accuracy # - Trailer suspension reworked with resistant forces applied at the fifth wheel to replicate the effects of trailer chassis flex # v1.35 Changelog: # - 4-point truck cab suspension # - Increased cab mass to 700kg (~the average mass of different cabs with different heights) # - Overhaul of trailer/truck weight distribution algorithm # - Better/more realistic weight distribution for tandem axles to improve traction # - Realignment of tyre collisions with their models to ensure that trucks/trailers roll more accurately # - Several bug fixes # Further physics improvements are constantly in the works to improve the driving simulation in-game. version: 2 # These coeficients are used for computing autocentering wheel speed. # The faster vehicle moves and the more steering wheel is turned left or right # the higher autocentering speed is. # Given value of speed_coef is for 100km/h velocity (linear raise). # Given value of angle_coef is for maximum wheel turn (30degrees, linear raise). # Returning speed coeficient is computed by multiplication of both coeficients. # When result coeficient is 1, returning speed is exactly the same as full # turning speed. This balance points define natural limits of steering # dependent on vehicle speed. # Ratio_coef defines upper limit of result coeficient (ratio against player). steering_speed_coef: 4.0 steering_angle_coef: 2.0 steering_ratio_coef: 0.95 # Maximum allowed rotation of the front wheels (degrees) max_visual_rotation: 38 # Modification of base steering sensitivity depending on truck speed. # Used only with relative steering (keyboard, joypad). steering_sensitivity_multiplier_0kmh: 1.0 steering_sensitivity_multiplier_100kmh: 0.4 steering_sensitivity_multiplier_minimum: 0.2 steering_sensitivity_multiplier_maximum: 10.0 # maximum allowed relative angles in degrees between truck and trailer joints fifth_wheel_pitch: 20 fifth_wheel_roll: 3 trailer_joint_pitch: 20 trailer_joint_roll: 3 spreader_joint_pitch: 5 spreader_joint_roll: 3 # brake strength brake_torque_factor: 1.0 # how much stronger braking is at low speeds braking_curve_peak_rel: 1.5 # where approx. the braking curve bends brake_characteristic_rpm: 250.0 # front brakes are stronger by this factor brake_balance: 1.1 # maximum brake temperature max_brake_temperature: 200.0 # how much brakes cool down brake_cooling_rate: 0.01 # how much brakes warm up brake_friction_warming_rate: 4.0 cabin_max_pitch_angle_front: 4.0 cabin_max_pitch_angle_rear: 4.0 cabin_max_roll_angle: 4.0 cabin_suspension_travel: 0.05 cabin_suspension_damping_factor: 0.4 cabin_sway_bar_factor: 1.0 cabin_cog_height_offset: 0.5 cabin_mass: 2000.0 wheel_mass: 85.0 # wheel suspension damping strength damping_scaling_front_factor: 0.35 damping_scaling_rear_factor: 0.7 damping_scaling_trailer_factor: 0.25 # anti-roll/sway-bar stiffness (only applies to the front axle) sway_bar_stiffness_factor: 0.01 # intensity of engine braking (not motor brake) thrust_characteristic_viscosity_factor: 1.0 # transmission resistance transmission_viscosity_factor: 1.0 # retarder resistance transmission_viscosity_retarder_factor: 1.0 # rotational wheel resistance wheel_viscosity_factor: 1.0 # clutch strength clutch_viscosity_factor: 1.0 clutch_connected_viscosity_factor: 10.0 manual_clutch_viscosity_factor: 0.5 manual_clutch_connected_viscosity_factor: 10.0 # torque converter strength torque_converter_viscosity_factor: 0.2 torque_converter_locked_viscosity_factor: 10.0 # relative magnitude of flywheel inertia inertia_scaling_const: 1.0 # transmission inertia relative to the flywheel transmission_rel_flywheel_inertia: 0.5 # approximate air resistance: resistant_force = air_resistance * sqr(speed) air_resistance: 3.0 # friction parameters # stiffness of tyre material bristle_stiffness_longitudinal_factor: 1.0 bristle_stiffness_lateral_factor: 1.0 # damping of tyre deformation bristle_damping_longitudinal_factor: 1.0 bristle_damping_lateral_factor: 1.0 # coefficients related to wheel slipping slip_longitudinal_factor: 1.0 slip_lateral_factor: 1.0 } }

@@cristineltr awesome thanks, because it looks to real that i would love that in game to

👍

First you must know about GPU nvidia.. dont look on front number.. front number only series.. and after that it is what percentage improvement

Thanks

Thank you

@@cristineltr de nada

Hi

@@cristineltr hola

Thanks 👍

Hey

😍

Thanks

Thank you!

Mount Damger

@@cristineltr Thanks

Thanks